Yes, the MORryde RV Cargo Sliding Tray part # MR38FR comes with the frame rails which get bolted to the floor and the tray slides within. view full answer...
The 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR is just the cargo carrier with brackets to allow it to mount to a 4" x 4" and 4-1/2" wide x 4" high RV bumper. You would need to slide the cargo carrier to one side of the bumper and use a mount like the Ultra-Fab Folding Spare Tire Carrier for Trailers and RVs # UF15-954730 in the available space. view full answer...
Yes! I am happy to confirm that the MORryde Sliding Tray for RV Cargo Compartment # MR44FR comes with all universal mounting hardware required for installation. I went ahead and attached an image of the part listing from the manual as well as a photo of the hardware provided. view full answer...
Yes. The MORryde Sliding Tray for RV Cargo Compartment - 90" x 36" - 800 lbs - 2 Way # MR38FR does come with mounting hardware included. I've linked a photo of the included hardware for you to have a look at. view full answer...
I confirmed with MORryde that the bolt that you need to fit into the floor-mounting hole of the MORryde RV Cargo Sliding Tray - 72" x 29" - 2 Way Slide - 80 Percent Extension # MR49FR is a 5/16" bolt. This bolt is included in the hardware kit that comes with the # MR49FR. view full answer...
While this isn't a kit that is sold individually, I reached out to MORryde, who was able to tell me the parts breakdown of the mounting hardware for the MORryde Sliding Tray for RV Cargo Compartment - 60" x 20" # MR44FR.
They said the Sliding Trays such as # MR44FR came with the following hardware:
- (12) #12-11 x 2-1/2" Philips pan head sheet metal screws
- (12) #12-11 x 1" Phillips pan head sheet metal screws
- (8) 5/16"-18 x 2-1/2" grade 5 bolts
- (8) 5/16"-18 grade 2 nylon lock... view full answer...
The Replacement Crown Gear for Lippert Components RV Slide-Out Mechanism # LC116658 does not come with a set screw.
It is not available as a separate part that I could find but I did manage to find out it is a 3/8" - 16 x 3/8" set screw, which should be available locally at hardware stores. view full answer...
The tray is not included with the Rail Kit for Kwikee SuperSlide II, # LC370782. This is a kit that allows for custom fabrication of a tray to meet the needs or wants of an RV owner when a prefabricated slide out tray does match their wants/needs. These rail kits are available in varying lengths from 42" to as long as 90" in length. Please see the helpful link below for length options. view full answer...
Yes, the mounting hardware is included with the Solera slide topper so you won't need to purchase more hardware for the installation. The 12 foot slide-out awning is the exact part number you mentioned:
- Solera RV Slide-Out Awning - 12'1" Wide - 48" Projection - White # LCV000163298
The Solera # LCV000163298 will slide-outs that measure between 140" and 145" from outside to outside of your slide box, so you'll want to make sure that your has those measurements. view full answer...
Yes. The 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs # e99049 comes with the support brackets similar to the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2" # MO34VR. They're not branded from Mount-N-Lock, but they're essentially the same bracket and design. view full answer...
Yes, the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets # MO34VR are included with the 24x60 etrailer Cargo Carrier for RV Bumper # e99049. The supports are not included in the instructions assembly drawing as it not always able to be used with every bumper and is a separate component. The instructions for both of these are included at the bottom of the page. view full answer...
Yes, the RV Cabinet Drawer Slide Socket Set - C-Shape - 2-1/8" Deep Item # 37270725 will come with a left and right. It will also come with the mounting screws so you won't have to run to your local hardware store to install these. view full answer...
The rails are included so you do NOT have to purchase them separately for the TracRac SR that fits your 2021 Ram 1500 with a 5-1/2 foot bed:
- Thule TracRac SR Sliding Truck Bed Ladder Rack # TH57RV
The # TH57RV will give you everything you need to install on your truck. view full answer...
Yes, the Thule TracRac SR # TH97RV does come with the base rails included and is a confirmed fit on your 2021 Toyota Tundra. The base rails are also available with the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH24RV, in case those ever need to be replaced. view full answer...
Neither the 24x64 etrailer Cargo Carrier for RV Bumper # e83YR nor the 24x60 etrailer Cargo Carrier for RV Bumper # e99049 come with a spare tire bracket. If you were trying have both the carrier and a bumper mounted spare tire carrier, like # TR-2, then you'd want to go with the smaller 24x60 # e99049 carrier to have enough room on the bumper for the spare tire carrier. view full answer...
When it comes to The Bearing Block for your Schwinntec inverted slide system The Lippert Replacement Standard Bearing Block Kit for RV In-Wall Slide-Out # LC379060.
This system will replace the standard bearing block kit for Lippert In-wall slide-out systems. We do not currently have any other parts that will work for you. view full answer...